S'ha alliberat aquesta obra al domini públic pel seu autor Triddle de la Viquipèdia en anglès. Això s'aplica a tot el món. En alguns països això pot no ser legalment possible, en tal cas: Triddle concedeix a tothom el dret d'usar aquesta obra per a qualsevol propòsit, sense cap condició llevat d'aquelles requerides per la llei.Public domainPublic domainfalsefalse

Overview

This is a picture of the front of a Miller Syncrowave 350LX welding power source for Gas Tungsten Arc Welding and Shielded Metal Arc Welding. This machine has the ability to change direct current polarities as well as to change from direct current to alternating current welding current with rotation of the switch in the center of the picture. Do not switch under load is labeled below the switch because operation of the mechanical switch while the high welding current is flowing through it will cause arcing and destruction of the switch components.

Technical Specifications

• Output Range: 3 to 400 amperes
• Weight: 496 lb (225 kg)
• Dimensions: 36 inches (92 cm) tall, 22 inches (57 cm) wide, 25 inches (64 cm) deep

Power Label

For clarification the input power information label reads as follows:

• Volts 200/230/460
• Amps 151/131/67
• KW 17.4
• Phase 1
• Hertz 50/60