DescripcióWilliam Sturgeons first induction coil.png
English: Drawing of one of the first induction coils, built by British physicist William Sturgeon in 1837. The primary of the coil (B) was 260 ft. of bell wire wound on a wooden bobbin with an iron core, and the secondary was 1300 ft of thinner wire, insulated with a wax coating, wound on top, and soldered to the primary wire to make an autotransformer. The primary was powered by a liquid battery cell (0). The zinc sawtooth interrupter wheel (D) dipping in mercury was turned by hand to break the primary current, to create the flux changes necessary to induce a voltage in the secondary. The magnitude of the voltage produced was judged by how strong a shock it gave when the copper handles (H) were held.
It was one of the first transformers to use a divided iron core to prevent eddy currents. Sturgeon experimented with several cores and found that a core made of separate iron wires (F) gave more powerful shocks than a solid iron core when the interrupter wheel got above a certain speed (although Prof. G. H. Bachhoffner had discovered this a few weeks before Sturgeon, using one of Sturgeon's own coils.) Demonstrated to the London Electrical Society in August, 1837
Aquest fitxer és en el domini públic en els Estats Units. Això és aplicable a obres dels EUA on el copyright ha expirat, sovint perquè la seva primera publicació va ser abans de l'1 de gener de 1929. Vegeu aquesta pàgina per a més detalls.
Podria ser que aquesta imatge no estigui en el domini públic fora dels Estats Units (especialment on no s'aplica la regla del termini més curt per obres dels EUA, com Canada, la Xina continental (no a Hong Kong ni Macau), Alemanya, Mèxic i Suïssa). El creador i any de publicació són informació essencial i s'han de proporcionar. Vegeu Viquipèdia:Drets d'autor per a més detalls.
Llegendes
Afegeix una explicació d'una línia del que representa aquest fitxer
Aquest fitxer conté informació addicional, probablement afegida per la càmera digital o l'escàner utilitzat per a crear-lo o digitalitzar-lo. Si s'ha modificat posteriorment, alguns detalls poden no reflectir les dades reals del fitxer modificat.