Fitxer:Floppy drive spindle motor open.jpg

Fitxer original(1.600 × 1.200 píxels, mida del fitxer: 446 Ko, tipus MIME: image/jpeg)

Descripció a Commons

Resum

Descripció The spindle motor of a 3.5" floppy disk drive (by TEAC Corp.), taken apart. It is a brushless DC outrunner with a 12-pole stator. The stator is affixed to the circuit board, the rotor is lying to the right. The Hall sensors are included on the board, between coils, in the upper left.
Data
Font Treball propi
Autor Sebastian Koppehel

Llicència

w:ca:Creative Commons
reconeixement
Aquest fitxer està subjecte a la llicència de Creative Commons Reconeixement 3.0 No adaptada.
Sou lliure de:
  • compartir – copiar, distribuir i comunicar públicament l'obra
  • adaptar – fer-ne obres derivades
Amb les condicions següents:
  • reconeixement – Heu de donar la informació adequada sobre l'autor, proporcionar un enllaç a la llicència i indicar si s'han realitzat canvis. Podeu fer-ho amb qualsevol mitjà raonable, però de cap manera no suggereixi que l'autor us dóna suport o aprova l'ús que en feu.
Anotacions
InfoField
Aquesta imatge té anotacions: Vegeu-les a Commons

Llegendes

Afegeix una explicació d'una línia del que representa aquest fitxer

Elements representats en aquest fitxer

representa l'entitat

Historial del fitxer

Cliqueu una data/hora per veure el fitxer tal com era aleshores.

Data/horaMiniaturaDimensionsUsuari/aComentari
actual14:32, 14 set 2007Miniatura per a la versió del 14:32, 14 set 20071.600 × 1.200 (446 Ko)SKopp{{Information |Description=The spindle motor of a 3.5" floppy disk drive (by TEAC Corp.), taken apart. It is a brushless DC outrunner with a 12-pole stator. The stator is affixed to the circuit board, the rotor is lying to the right. |Source=Own photograp

La pàgina següent utilitza aquest fitxer:

Ús global del fitxer

Utilització d'aquest fitxer en altres wikis:

Metadades