Fitxer:Guillermo del Toro's Pinocchio exhibition at Cineteca Nacional - 4.tif

Fitxer original(4.000 × 6.000 píxels, mida del fitxer: 137,35 Mo, tipus MIME: image/tiff)

Descripció a Commons

Resum

Descripció
Español: Escultura de resina de Pinocho, usada en el filme de Guillermo del Toro. Imágenes de la exhibición del Pinocho de Guillermo del Toro. Explanada de la Cineteca Nacional de México, Ciudad de México, México.
English: Resin sculpture of Pinocchio, used in Guillermo del Toro's film. Images from the exhibition of Guillermo del Toro's Pinocchio. Esplanade of the Cineteca Nacional de México, Mexico City, Mexico.
Data
Font Treball propi
Autor ProtoplasmaKid
Permís
(Com reutilitzar aquest fitxer)


This creative work was created by ProtoplasmaKid It is licensed under a Creative Commons License. You are free to use and distribute it as you wish.

On the condition that you always place my attribution next to the material or in the credits of your derivative work in a visible, prominently, and intentional manner, as follows:
ProtoplasmaKid / Wikimedia Commons / CC-BY-SA 4.0

Although this work, or modified versions of it, may appear on many websites, this is the original material, and using it for free ONLY requires adhering to the license.
Also, it would be greatly appreciated if you notify me of the use of my photo, or if you want a different shot or version or a license for full commercial use, contact me by email or on my discussion page.

Mexico

The photographical reproduction of this work is covered under the article 148, VII of the Mexican copyright law (Ley Federal de Derechos de Autor), which states that
«Literary and artistic works already published may be used, provided that normal commercialization of the work is not affected, without authorization from the copyrightholder and without remuneration, invariably citing the source and without altering the work, only in the following cases: […]
VII. Reproduction, communication, and distribution by means of drawings, paintings, photographs, and audiovisual means of works visible from public places». See COM:CRT/Mexico#Freedom of panorama for more information.

deutsch | English | español | français | italiano | македонски | slovenščina | +/−

Posició de la càmera19° 21′ 36,1″ N, 99° 09′ 50,05″ O Kartographer map based on OpenStreetMap.Aquesta i altres imatges properes a: OpenStreetMapinfo

Llicència

Jo, el titular dels drets d'autor d'aquest treball, el public sota la següent llicència:
w:ca:Creative Commons
reconeixement compartir igual
This file is licensed under the Creative Commons Attribution-Share Alike 4.0 International license.
Sou lliure de:
  • compartir – copiar, distribuir i comunicar públicament l'obra
  • adaptar – fer-ne obres derivades
Amb les condicions següents:
  • reconeixement – Heu de donar la informació adequada sobre l'autor, proporcionar un enllaç a la llicència i indicar si s'han realitzat canvis. Podeu fer-ho amb qualsevol mitjà raonable, però de cap manera no suggereixi que l'autor us dóna suport o aprova l'ús que en feu.
  • compartir igual – Si modifiqueu, transformeu, o generareu amb el material, haureu de distribuir les vostres contribucions sota una llicència similar o una de compatible com l'original

Llegendes

Afegeix una explicació d'una línia del que representa aquest fitxer
Photograph of a Pinocchio sculpture made with resin and epoxy plasticine used in Guillermo del Toro's 2022 film. It is located inside an acrylic hood.

Elements representats en aquest fitxer

representa l'entitat

19°21'36.097"N, 99°9'50.051"W

Historial del fitxer

Cliqueu una data/hora per veure el fitxer tal com era aleshores.

Data/horaMiniaturaDimensionsUsuari/aComentari
actual02:20, 25 des 2022Miniatura per a la versió del 02:20, 25 des 20224.000 × 6.000 (137,35 Mo)ProtoplasmaKidUploaded own work with UploadWizard

La pàgina següent utilitza aquest fitxer:

Ús global del fitxer

Utilització d'aquest fitxer en altres wikis:

Metadades